5 Best Vape Tanks that don’t leak for 2023

Introduction

The current generation is very vulnerable to a new change. Be it good, be it bad. It has become far easier to implement trends. The young population is soon to grab hold of a drift but they still dont know how to choose vape tanks that don’t leak and how to manage them properly. They also lack proper judgment, are easier to manipulate. Peer pressure also plays a vital role in spreading the trends. One such wind to talk about is the successor of cigarettes, called vaping. It is a battery-operated smoking device. It comes in a variety of distinctive flavors.

The vape industry has gone uphill since 2016. It started selling in the local gas stations. There would be a variety of flavors available for the customers. Before buying, people would get a free demo of the product. Hence, a vast customer base formed for the product. Vaping became popular in countries like the UK, UAE, Indonesia.

Vapes underwent a boom in the retail market sector after the retail market started selling vapes properly. Vaping sector has provided many employment opportunities in the Asia pacific zone. There are also various opportunities that this industry delivers, like vape tricks competition that gets harbored in zonal levels to international levels. Currently, the vape industry stands at a stacking 18.47 billion USD value. The estimated CAGR (Compound Annual Growth Rate) is 28.1% from 2021 to 2028. That was a lot of information. We will be covering the components of a vape and suggest the best go-to vape tanks that don’t leak. 

How to vape?

After knowing all these, the non-smokers might be wondering how vaping works? How does the machine operate? We are here with the answers. 

The vape machine has two main sections- the mod and the tank.

There is flavorful liquid in the tank. The e-liquid gets vaporized as electrical heat is applied. We inhale the vapor through the tank tip, known as the drip-tip.

Vape-components explained

Before we seek the answers to un-leaking vape tanks, let us understand each component of a vape very carefully. The three main parts are-

• The mod/ body
• Tank
• A fire switch

The mod is the main body of the tank. It is the most vital part of the vape, as it is the place where we put on batteries. It is the powerhouse of the vape and supplies heat to the tank. High-end vapes may have a digital display on the mod where modifications can be made, like the supply of electricity, display lights, and all the other kinds of changeovers and adjustments.

The tank is the most intricate and fascinating part of the whole machine. 

It has various elements like

• The base– holds the entire tank and attaches it to the mod.
• The coil– is made of highly resistant material. It resists electricity and produces heat. This coil also has soaked up cotton that contains the e-liquid. The wire coil gets heated up and vaporizes the liquid present in the cotton.
• The glass tube contains the e-liquid. It is refillable.
• The top cap– Seals up the whole tank.
• The drip tip– is where we inhale the vapor.

Image Credits- https://pixabay.com

We press the fire switch present in the mod that completes the circuit and electricity flow in the machine. The current flows to the tank and heats the coil. The coil, in turn, heats the e-liquid soaked cotton material. The vapor produced is drawn through the drip tip, and the cycle continues.

Why do vape tanks leak?

Vape tanks may leak for various reasons. Most of the time, it is due to the mishandling of the product by the user. Some of the most common reasons are-

• Improper cotton priming- We need to make sure while filling the e-juice that the cotton is partially soaked. Improperly filling the liquid may cause the juice to drip from the vent hole in the base. We have to pour where the cotton is exposed, not directly down the hole.
• Change coils- After prolonged usage of a tank, the cotton may lose the ability to hold the liquid. Switch the tank coil every month to prevent leaks due to this reason.
• Leave the device in an upright position- The most common cause for leaks is that many people leave their devices flat on the surface.
• Overfilling- The most blatant reason. Overfilling makes the cotton absorb more liquid than it should. 
• Not using them for extended periods- is also a potential reason for vape leaks.
• Check for faulty parts- Most of the time, the rubber O ring that acts as a seal for the e-juice becomes damaged.

Vape tanks that don’t leak

Should we constantly keep an eye out for faults in our tank, or should we switch to tanks that do not leak at all? They may not be pocket-friendly, but they relieve us of the most annoying problem related to vaping. Leaks can get messy at times. Here are some unlikable tanks that you should check out.

AUGVAPE INTAKE DUAL RTA

This specimen has a top-mounted ventilation system. It has a dual coil system and is the successor of 

the very famous single-coil intake RTA. It has a 5-7ml capacity tank. Leaks become physically impossible.

The overhead ventilation system does not have a compromise on the taste factor. It has a well-efficient air-flow system that allows maximum flavor retention and a smooth draw.

GEEKVAPE ZEUS X (single coil & mesh)

Geekvape uses mesh instead of a wire. A mesh instead of a wire needs more cotton, which prevents leaks. The Zeus X uses a top-mounted filing system that feeds the coil with juice from above. There are no holes for the liquid to escape from beneath. It also provides an O ring gasket on both ends that completely seals off the system containing any leaks.

HELLVAPE DEAD RABBIT V2

It is capable of running both single and dual coil systems. It gives maximum flavor and has a highly convenient top-build ventilation system.

This tank is highly leak-proof because of the intricate enclosed system. It completely seals off its contents.

WOTOFO PROFILE M RTA

Wotofo is yet another mesh coil RTA. It provides a small storage capacity of only 2ml. The bottom leaves no space for liquid to escape, and for obvious reasons, it has a top-mount ventilation system.

KYLIN M LEAK PROOF RTA( Mesh & Single coil)

It draws air from the top. Through advanced channeling systems, the flow gets to the coil. The juice has nowhere to escape. The tons of cotton will soak up the stray juices. The system thus remains perfectly intact.

Image Credits- https://pixabay.com

Conclusion

Vaping cannot be a substitute for smoking. It has its share of side effects and health hazards. It may not have nicotine in it, but it still has a lot of harmful chemical substances. Vaping is quite addictive. It hinders brain development in both teens and kids. Occasional vaping for fun is not as lethal as getting addicted to it is. BE safe out there everyone

David

Recently, the Cannabis industry has risen to new heights. Its exponential growth has molded several budding writers, business chains, and experts who have a passion for the same. 

Similar has been the journey of Nick Jones. He has grown himself as a powerful individual personality and a cannabis industry expert, having decades of experience in the industry. 

His wide range of experience comprises performing intriguing roles at various esteemed organizations. In addition, he has also worked as a copywriter, SEO editor, and researcher for leading cannabis businesses in the United States of America.  

Interestingly, he has traced the transformation and progression of the cannabis industry first-hand that adds even more credibility, insights, and value to his works. Therefore, the niches he has covered and has written about: Vape, Kratom, Marijuana, Delta 8 THC, and CBD, attract superb engagement and eyeballs from the audience. 

Conclusively, his out-of-the-box ideas and interests continue to be an inspiration for many young cannabis enthusiasts.